The classification of automobile wheels can be divided according to material, structure, use, etc. According to different materials, wheel rims can be divided into aluminum alloy wheels, steel wheels and carbon fiber wheels; according to different structural forms, wheel rims can be divided into monoblock wheels, multiple-piece wheels and tire-studded wheels; according to different uses, wheel hub...
When choosing the size of a car wheel, there are many factors to consider.Traditionally, larger wheels are considered a better choice because they can provide a better appearance and higher performance.However, not all vehicles are suitable for using large-size wheels, so different factors need to be weighed. First, larger wheels usually mean smaller tire flatness.This can improve handling and veh...
The vast majority of aluminum alloy automobile wheels are now cast, despite the heat treatment, the residual stress must still exist. If it is an even number, it is easy to produce greater stress on a pair of spokes at 180 degrees, which exceeds the tensile and shear strength, and then breaks. If it is an odd number of spokes, the stress and deformation can be transferred to more spokes, which pla...
Copycat car wheels or counterfeit car wheels have caused many tragedies. But if you are buying a large-scale forged car wheel, then don't worry about using it. In fact, in terms of strength, large-made car wheels are stronger than original car wheels, even though they are lighter. As for the service life, it depends on whether you switch to a low flat ratio tire. If the tire specifications remain ...
Recently, two piece forged wheels are more and more popular in daily life. A two piece wheel have rims fabricated separately from the center and then fastened together with bolts. It is convenient to use a complicated finish since the barrel and the center are separated. The shape is also more complicated and changeable, more fashionable. Besides, through the different sizes of rims and spokes, it...
Both CNC and polishing are "cutting" the surface of the wheel hub to achieve a flat effect.But the difference lies in the scale range. If a CNC lathe can be processed at 0.1~1mm, then polishing is processed at 0.01~0.05.Because they have different depths of "knife marks" on the wheels, they have different flatness and different reflective effects. However, due to the insufficient processing depth ...
