A negative-value rim measures the deviation value between the fixed surface of the rim and the centerline of the rim. Therefore, when a negative-value rim is a larger negative value, it means that the greater the deviation distance of the rim, the greater the degree of outward tilt. When you see the word ”offset", this will have an impact on the performance of the tires and the perf...
The size of the car wheel rim will have different effects on the carrying capacity of the car, the performance of cornering, etc.The specific use of large and small wheels, the owner can choose according to the difference between the two. 1. In terms of carrying capacity, large wheels are stronger than small wheels.In order to save costs, small wheels usually choose steel materials, while large wh...
If the wheels of our cars are rusty, the following methods can be used to solve it.： 1. You can use very fine water sandpaper dipped in water and gently rub it on the rusty place to remove the rust spots and then apply a layer of primer, so as to ensure that the rust spots will not expand. If it is a relatively new scratch, apply the primer directly after wiping, the effect is better. 2. The above...
In life, tires are a very important part of the operation of the car, so where do you need to repair them when there is a problem or damage to the wheel rim of the tire?In fact, this is relatively simple. Usually, you can go to a special repair shop or the 4s shop of the car for a comprehensive overhaul. Before performing repairs, a comprehensive inspection must be carried out to clarify wher...
The rim et value means the offset value, which represents the deviation distance between the rim mounting surface and the center line of the rim. The wheel rim et value can be divided into positive and negative offset distance and zero offset distance. When the wheel rim et value is larger in the positive direction, it means that therim mounting surface is inward. The dist...
1. Select a suitable cleaning agent. Household cleaners and common detergents on the market are more alkaline or acidic and more corrosive to the wheel surface. To avoid contact with strong chemicals, choose neutral soapy water to wash your wheels. 2. Do not wash the wheels when the temperature is too high. When the temperature of the wheel rim is high, please do not directly wash it with col...
1. Heat dissipation requirements: If the car runs for a long time, it will make the car wheel very hot. What’s more, the braking system will also generate a lot of heat. If this heat is not released in time, it will bring a big problem to the driving safety of the car and may cause the tire to burst. The hollow design can increase the contact area between therim spokes and the air, which...
An alloy wheel is an automobile wheel that is made of alloys of aluminum or magnesium. Getting a good run via cars and motorcycles, this segment has seen a sudden spurt in demand in the recent years. As magnesium was used earlier for making an alloy wheel, these wheels were often termed as mag wheels (MAG for magnesium). As compared to traditional steel wheels, This type wheel has the advantage of...
1. Durable and safer Forged aluminum rings are 1-2 times stronger than cast aluminum rings and 4-5 times stronger than general iron rings, so they are stronger, have better toughness and fatigue resistance, and are safer. 2. Lightweight Forged wheels of the same size can be about 20% lighter in weight, and 1KG lighter on the wheel can increase 10 horsepower. In addition, the lightweight also signi...
Many people think that as long as the wheel hub is bigger, it must be better, after all, it is certain to look good. But there are often disadvantages. The disadvantages will be discussed in a while, let’s talk about how to choose the hub and what craft to choose. At present, there are three mainstream process hubs on the market, low pressure casting, flow forming wheel and forged wheel. This is m...
