Tire pressure is an issue that car owners should always pay attention to, but some car owners may think that they are buying tires from big brands, such as Michelin, Goodyear, Bridgestone, Dunlop and other international brands of tires, so the quality can be guaranteed.Even if the tires are out of gas, it should be fine to drive as usual.And this idea is wrong, and there are countless accidents ca...
Copycat car wheels or counterfeit car wheels have caused many tragedies.But if you are buying a large-scale forged car wheel, then don't worry about using it.In fact, in terms of strength, large-made car wheels are stronger than original car wheels, even though they are lighter. As for the service life, it depends on whether you switch to a low flat ratio tire.If the tire specifications remain the...
1. High temperature Frequent flat tires in summer have a lot to do with the high temperature in summer.Because, once the road surface temperature rises, the friction between the tire and the road surface causes the tire surface temperature to be very hot.Under thermal expansion and contraction, the tire carcass rises and thins, and then it can easily lead to a flat tire. 2. Overload In China,...
“Multi-layer environmental protection ion technology" uses powder spraying technology and magnetic control vacuum coating technology to process electroplating wheels. The production technology replaces the traditional high-pollution, high-cost, zero-pollution, and production model, creating high value-added, advanced product technology, beautiful and luxurious appearance, green environmental prote...
Automobile wheels are an important auto parts, which not only affect the appearance of the car, but also directly affect the safety performance of the vehicle.At present, the wheels on the market are mainly divided into steel wheels, aluminum alloy wheels, carbon fiber composite wheels and magnesium alloy wheels by material. Steel wheels Steel wheels are traditional automobile wheel hub materials....
With the development of the automobile industry, the increase in automobile production and share has led to economic development and brought convenience to people. Wheels are an indispensable part of automobiles, and their performance is directly related to the operating stability and safety performance of vehicles, but at present, some automobile wheels have poor impact resistance. The problem is...
The following factors need to be considered when choosing a car wheel： Tire size and type: The size and type of tires of different models are different. The wheel hub size should be selected according to the actual size and type of the vehicle. Vehicle performance requirements: Different wheel sizes will affect the performance of the vehicle, such as acceleration, braking and handling.Choose the a...
The wheel rim is an important part of the car, also known as the rim.Generally speaking, it is the part of the axle mounted in the center of the wheel. Automobile wheels are mainly divided into manufacturing processes, namely casting and forging.Generally speaking, the cast ring is aluminum, and the forged ring also has aluminum and titanium.However, in general, forged rings have high strengt...
The aluminum material is relatively light, which can reduce the quality under the shock absorber and ensure a good suspension reaction speed. There is also the good heat dissipation performance of aluminum. 1. Fuel saving On average, each aluminum alloy wheel is 2kg lighter than a steel wheel of the same size, and a car can save 10kg in weight with 5.According to Japanese experiments, for every 1k...
When choosing the size of a car wheel, there are many factors to consider.Traditionally, larger wheels are considered a better choice because they can provide a better appearance and higher performance.However, not all vehicles are suitable for using large-size wheels, so different factors need to be weighed. First, larger wheels usually mean smaller tire flatness.This can improve handling and veh...
The vast majority of aluminum alloy automobile wheels are now cast, despite the heat treatment, the residual stress must still exist. If it is an even number, it is easy to produce greater stress on a pair of spokes at 180 degrees, which exceeds the tensile and shear strength, and then breaks. If it is an odd number of spokes, the stress and deformation can be transferred to more spokes, which pla...
Both CNC and polishing are "cutting" the surface of the wheel hub to achieve a flat effect.But the difference lies in the scale range. If a CNC lathe can be processed at 0.1~1mm, then polishing is processed at 0.01~0.05.Because they have different depths of "knife marks" on the wheels, they have different flatness and different reflective effects. However, due to the insufficient processing depth ...
1. Don't use detergent indiscriminately Maintaining wheels is the same as maintaining a car. Many household detergents and dishwashers commonly used on the market are basically too strong for the surface of the wheel hub due to their alkaline or acidic nature, which will cause chemical reactions on the surface of the wheel hub and lose their luster. The relationship is beautiful. Be careful w...
