other
  • April 15, 2022
    Wheel adapters are usually found in the situations which require a fitting to help to put a wheel on a vehicle. Dating back to the very beginning, the wide bolt pattern has made impossible decorative rims. As a result, this fitting are designed to bring in many benefits. Generally speaking, the materials such as the aluminum or steel are available for manufacturing of this necessary industrial fit...
  • May 23, 2022
    When shopping for nuts make sure they match the thread diameter, pitch and seat of the ones you are replacing. If these aren't the right fit, the new nut may hurt your expensive wheels. They can also ruin the mounting lugs for your vehicle, which is not a cheap proposition. And then there's the fact that improperly secured wheels make your car a potential hazard on the road. The three basic types ...
  • May 23, 2022
    Once you have made a wheel sale, test-fitted the wheels, and mounted and balanced the tires, you must do one final thing--attach the wheels to the car. Although often overlooked, the hardware associated with wheels is vital to getting a good installation. The most obvious piece of hardware is the lug nuts used to secure the wheel to the car. In most cases, either for appearance sake or functionali...
  • September 23, 2022
    1. Select a suitable cleaning agent. Household cleaners and common detergents on the market are more alkaline or acidic and more corrosive to the wheel surface. To avoid contact with strong chemicals, choose neutral soapy water to wash your wheels. 2. Do not wash the wheels when the temperature is too high. When the temperature of the wheel rim is high, please do not directly wash it with col...
  • October 14, 2022
    If the wheels of our cars are rusty, the following methods can be used to solve it.: 1. You can use very fine water sandpaper dipped in water and gently rub it on the rusty place to remove the rust spots and then apply a layer of primer, so as to ensure that the rust spots will not expand. If it is a relatively new scratch, apply the primer directly after wiping, the effect is better. 2. The above...
  • October 14, 2022
    The size of the car wheel rim will have different effects on the carrying capacity of the car, the performance of cornering, etc.The specific use of large and small wheels, the owner can choose according to the difference between the two. 1. In terms of carrying capacity, large wheels are stronger than small wheels.In order to save costs, small wheels usually choose steel materials, while large wh...
  • October 21, 2022
    A negative-value rim measures the deviation value between the fixed surface of the rim and the centerline of the rim. Therefore, when a negative-value rim is a larger negative value, it means that the greater the deviation distance of the rim, the greater the degree of outward tilt. When you see the word ”offset", this will have an impact on the performance of the tires and the perf...
  • October 21, 2022
    In daily use, the wheels of the car may be deformed, which will affect the maneuverability and grip of the car to a certain extent. 1. First of all, the wheelrim, as an indispensable and important part of the car, bears the main impact and pressure of the vehicle.Therefore, once the car wheels are deformed, it will affect the reliability of the vehicle and reduce the grip of the car wheels. 2. The...
  • October 27, 2022
    When our vehicles need to replace tires, in most cases they replace tires of the same specifications, but I don't know if everyone has ever thought about whether it is feasible if we replace tires of other specifications without replacing the wheels?The answer is yes, as long as you refer to the wheel tire comparison table to select the tires that can be installed. Because the use of tires of othe...
  • November 22, 2022
    There are many parameters involved in replacing the wheels. It is best for interested owners to do their homework first so as not to cause hidden dangers to safety. 1. Center Bore (CB) Refers to the size of the center hole of the hub.Although wheels with different values from the original factory can be installed through positioners, this is not recommended for safety reasons. 2. Section circle di...
  • December 29, 2022
    Because of thermal expansion and cold shrinkage, it is okay to keep the tire pressure of a car at 2.3 bar or even to 2.5 bar in winter, but the standard tire pressure specified by each car is different, so the specific requirements depend on the car's user manual, but the tire pressure in winter is 0.1 to 0.2 bar higher than the normal setting. The tire pressure of the car must be maintained withi...
  • February 01, 2023
    Sports car tires are thinner because they can have a stronger grip. When the power output of the vehicle increases, the grip also needs to increase, otherwise it is difficult to cope with the output torque.If you want the grip of the tire to become stronger, you can widen the tire, but this will increase the fuel consumption of the vehicle. Sports car tires generally do not use a way to widen the ...
  • February 02, 2023
    There are many kinds of wheels according to the diameter, and there are also many kinds according to the width.Then, many models can be divided into different diameters, different widths, and different materials.Some car owners think that the original tires are not advanced enough and want to upgrade. They often widen, reduce the flat ratio, increase the diameter, and change the material. At this ...
  • February 10, 2023
    Because aluminum alloy wheels have the following four characteristics, many cars currently use aluminum alloy wheels: 1.Driving comfort has been improved. Because aluminum alloy wheels have the metal characteristics of absorbing vibration and rebound, they have high dimensional accuracy after being processed by CNC machine tools.It's really round.Partial swing and small beating.The balance is very...
  • February 17, 2023
    The et value of the wheel rim is also called the et offset value, and the et value is the offset value, which is the offset.In fact, it refers to the degree of deviation between the rim installation interface and the centerline of the rim. If the et value is greater and becomes a negative value, then it proves that the rim installed on the body will deviate from the outside. So in other words, dif...
1 2
A total of 2 pages
Have Any Questions?
You can contact us any way that is convenient for you. We are available 24/7 via !
Get the latest news and updates about our wheels by subscribing today.

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

whatsapp